View 2SC1567A_336740.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Power Transistors
2SC1567, 2SC1567A
Silicon NPN epitaxial planar type
Unit: mm
For low-frequency high power driver Complementary to 2SA0794 (2SA794) and 2SA0794A (2SA794A) I Features
* High collector to emitter voltage VCEO * Optimum for the driver stage of low-frequency and 40 W to 100 W output amplifier * TO-126B package which requires no insulation plate for installation to the heat sink
8.0+0.5 -0.1 3.160.1
3.80.3 11.00.5
3.20.2
1.90.1
I Absolute Maximum Ratings TC = 25C
Parameter Collector to base voltage Collector to emitter voltage 2SC1567 2SC1567A 2SC1567 2SC1567A VEBO ICP IC
*
0.750.1 4.60.2
0.50.1 0.50.1 1.760.1 2.30.2 3
Symbol VCBO VCEO
Rating 100 120 100 120 5 1 0.5 1.2 150 -55 to +150
Unit V
1 2
16.01.0
1 : Emitter 2 : Collector 3 : Base TO-126B Package
V
Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature Note) *: Without heat sink
V A A W C C
PC Tj Tstg
I Electrical Characteristics TC = 25C
Parameter Collector to emitter voltage Emitter to base voltage Forward current transfer ratio 2SC1567 2SC1567A VEBO hFE1 * hFE2 Collector to emitter saturation voltage Base to emitter saturation voltage Transition frequency Collector output capacitance Note) *: Rank classification Rank hFE1 R 130 to 220 S 185 to 330 VCE(sat) VBE(sat) fT Cob IE = 1 A, IC = 0 VCE = 10 V, IC = 150 mA VCE = 5 V, IC = 500 mA IC = 500 mA, IB = 50 mA IC = 500 mA, IB = 50 mA VCB = 10 V, IE = -50 mA, f = 200 MHz VCB = 10 V, IE = 0, f = 1 MHz Symbol VCEO Conditions IC = 100 A, IB = 0 Min 100 120 5 65 50 130 100 0.2 0.85 120 11 20 0.4 1.2 V V MHz pF 330 V Typ Max Unit V
Note)The part numbers in the parenthesis show conventional part number.
3.050.1
1
2SC1567, 2SC1567A
PC T a
6
Power Transistors
IC VCE
1.2 18mA TC=25C 16mA 14mA 12mA 10mA 8mA 0.8 6mA 1.2 VCE=10V TC=25C 1.0
IC I B
Collector power dissipation PC (W)
5
(1)With a 100x100x2mm Al heat sink (2)Without heat sink
1.0
Collector current IC (A)
4 (1) 3
Collector current IC (A)
IB=20mA
0.8
0.6
4mA
0.6
2 (2)
0.4 2mA 0.2
0.4
1
0.2
0 0 20 40 60 80 100 120 140 160 180
0 0 2 4 6 8 10 12
0 0 5 10 15
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base current IB (mA)
VCE(sat) IC
Collector to emitter saturation voltage VCE(sat) (V)
10 3 1 0.3 TC=100C 0.1 0.03 0.01 0.003 0.001 1 3 10 30 100 300 1000 25C -25C
VBE(sat) IC
Base to emitter saturation voltage VBE(sat) (V)
IC/IB=10 100 30 10 3 1 0.3 25C 0.1 0.03 0.01 1 3 10 30 100 300 1000 TC=-25C 100C IC/IB=10 10000
hFE IC
VCE=10V
Forward current transfer ratio hFE
3000 1000 300 100 30 10 3 1 1 3 10 30 100 300 1000 TC=100C 25C -25C
Collector current IC (mA)
Collector current IC (mA)
Collector current IC (mA)
f T IE
200 180 50
Cob VCB
105 IE=0 f=1MHz TC=25C 40 104
ICEO Ta
VCE=20V
160 140 120 100 80 60 40 20 0 -1
Collector output capacitance Cob (pF)
Transition frequency fT (MHz)
VCB=10V f=200MHz TC=25C
ICEO (Ta) ICEO (Ta=25C)
1 3 10 30 100
30
103
20
102
10
10
0 -3 -10 -30 -100
1 0 20 40 60 80 100 120 140 160 180 200
Emitter current IE (mA)
Collector to base voltage VCB (V)
Ambient temperature Ta (C)
2
Power Transistors
ICBO Ta
104 VCB=20V 10 3 103
2SC1567, 2SC1567A
Area of safe operation (ASO)
Single pulse TC=25C
Collector current IC (A)
1 0.3 0.1 0.03 0.01
ICP IC t=10ms t=1s
ICBO (Ta) ICBO (Ta=25C)
102
10
0.003 1 0 20 40 60 80 100 120 140 160 0.001 1 3 10 30
100
2SC1567A
300
2SC1567
1000
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
3
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 2SC1567A

	To Download 2SC1567A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .